FDOT Asphalt Paving Level 1EXAM QUESTIONS AND SOLUTIONS
7 views 0 purchase
Course
FDOT Asphalt Paving Level 1
Institution
FDOT Asphalt Paving Level 1
FDOT Asphalt Paving Level 1EXAM
QUESTIONS AND SOLUTIONS
Random sampling - ANSWER Are random numbers generated usually by a VT for
cores to be extracted from the roadway
How often should you calibrate a Straight edge - ANSWER Calibrate at the start of
each working period
Us...
FDOT Asphalt Paving Level 1EXAM
QUESTIONS AND SOLUTIONS
Random sampling - ANSWER Are random numbers generated usually by a VT for
cores to be extracted from the roadway
How often should you calibrate a Straight edge - ANSWER Calibrate at the start of
each working period
Using the manual straight edge you find what kind of spot to place the rolling
straightedge? - ANSWER Locate a flat area with the manual straightedge and place the
rolling straightedge next to the manual straightedge and the gauge should read 0
The 3/16 and the 3/8 shims go under which wheels during calibration - ANSWER The
outside wheels to measure the low and the center to measure the high. Gauge should
read 3/16 on the 3/16 shim and vice versa for the 3/8 shims. Make sure the center
wheel moves up and down freely.
When to perform final straightedge - ANSWER After an entire lane has been paved
When to perform final straightedge - ANSWER Pavement should be an ambient
temperature
You cannot use the straightedge until it has been properly - ANSWER calibrated
When performing the straightedge procedure - ANSWER Maintain proper traffic
management and safety
Cross slopes can be either done - ANSWER Manually or with a smart level
When using a manual cross slope you first - ANSWER Place a simple level on
pavement
After placing the simple level on the pavement then you - ANSWER Raise the down
end of the level until it is level (bubble center)
, After the simple level is lifted until it is level you measure what - ANSWER The length
of the simple level and the height between the (previously down) end of the level to the
pavement
Formula to calculate the manual cross slope - ANSWER Calculate the slope using the
formula
( h / l ) x 100 = slope %
Requirements for the rolling Straightedge - ANSWER Must have a read out gauge, kept
clean and in working order, low and high reading, and marks to the nearest 1/16 (1mm)
Rolling Straightedge pulled at - ANSWER 3 to 5mph or less
Deficiencies pointed out with rolling straightedge you should first - ANSWER Mark the
pavement at the center wheel where the needle initially shows a deficiency and where is
ends. Also record location and measurements of deficiency.
Core sampling is used for - ANSWER testing density
and permeability
Core sampling equipment - ANSWER Concrete saw
Diamond bit core drill
Size of core depends on test
Ice chest (Optional)
Ice (Optional)
Asphalt to patch hole
During core sampling the barrel should always be - ANSWER perpendicular to
pavement
Core sampling patching - ANSWER Fill hole with patch mix, if in lifts tamp each lift
Storing cores - ANSWER Store in ice chest with bagged ice on top or put in an air
conditioned cab
Best stored upright in a cool place
DO NOT THROW INTO PICKUP
Determine Bulk Specific gravity on sampled cores - ANSWER Trim to correct lift
Weigh dry sample if dry otherwise
Place in water (77+-2) for 4+-1 minute
Then roll within five seconds to achieve SSD weight
Then dry to a constant weight with fan or core dryer
Bulk Specific Gravity formula - ANSWER dry / SSD - water weight = BSG
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller TheExamMaestro. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.49. You're not tied to anything after your purchase.
