Exam (elaborations)
ET ASNT Level 1 Detailed Questions And Expert Answers 2024
- Course
- Institution
ET ASNT Level 1 Detailed Questions And Expert Answers 2024
[Show more]
Content preview
ET ASNT Level 1 Detailed Questions AndExpert Answers 2024
I. A test specimen used as a basis for calibrating test cquipment or as a
comparison when evaluating test results is referred to as a:
a. null-balancer
b. phase shifter .
C. reference standard
d. high pass filter - ANS .C. reference standard
In an eddy current testing situation, which of the following can provide
sources of noise?
a. instrumentation electronic circuits
b. nonspecific variations within the test object
c. electrical interference
d. all of the above - ANS .d. all of the above
3. The ratio of the response or amplitude from signals of interest to the
response or amplitude of indications that contain no useful information for
the test being conducted is referred to as:
a. Poisson's ratio
b. signal-to-noise ratio
c. the conductivity-to-permeability ratio
d. the reactance-to-resistance ratio - ANS b. signal-to-noise ratio
4. IACS is a recognized abbreviation for:
a. Induced Alternating Current System
b. Inductively-Activated Comparison System
c. Internal Applied Current System
, d. International Annealed Copper Standard - ANS d. International Annealed
Copper Standard
Which of the following is not a basic component of eddy current equipment?
a. amplifier
b. coil
c. liquid couplant
d. detector - ANS c. liquid couplant
The process of comparing the reading or output of an instrument, device, or
dial with a standard to determine the instrument's accuracy, capacity, or
graduations is referred to as:
a. calibration
b. differentiation
c. integration
d. phase shifting - ANS a. calibration
When'conducting an eddy current test using a differential comparison coil
arrangement that compares an external reference standard with the test
specimen, the system should be nulled or balanced:
a. with only the reference standard in one coil
b. with the reference standard in one coil and an acceptable test specimen in
the other coil
c. with the reference standard in one coil and an unacceptable test specimen
in the other coil
d. with only the test specimen in one coil - ANS b. with the reference
standard in one coil and an acceptable test specimen in the other coil
The impedance of an eddy current test coil will increase if the:
a. test frequency increases
b. inductive reactance of the coil decreases
c. inductance of the coil decreases
, d. resistance of the coil decreases - ANS • a. test frequency increases
Some of the products commonly tested using encircling coils are:
a. rods, tubes, and wire
b. plate when volumetrically inspected
c. sheets and metalized foil
d. al of the above - ANS a. rods, tubes, and wire
Which of the following would normally be considered the best fill factor
when testing straight tubing with an encircling or feedthrough coil?
a. 0.95 (95%)
b. 1.75 (175%)
c. 0.50 (50%)
d. 0.25 (25%) - ANS a. 0.95 (95%
When a magnetic metal part is placed in an eddy current test coil, the
impedance of the coil will be changed by which of the following properties of
the part?
a. conductivity
b. dimensions
c. permeability
d. all of the above - ANS •d. all of the above
An eddy current is a circulating electrical current induced in a conducting
article by:
а. gamma rays
b. an alternating magnetic field
c. a piezoelectric force
d. any of the above - ANS b. an alternating magnetic field
The conductivity of a material can be changed by changing the:
a. alloy of the specimen
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Schoolflix. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $14.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
77254 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now