- 4" - (value unspecified, likely varies based on local codes).
5. Type of fitting for continuous waste and venting of back-to-back lavatories:
- Answer: Double fixture fitting.
6. Depth for filling caulk joints for cast iron bell and spigot:
- Answer: 1" filled to a depth of not less than molten lead.
7. Fittings to connect horizontal drainage to another horizontal drainage line:
- Answer: Wye, Combination Wye with 1/8 bend, Long sweep.
8. Cleanout locations required by code:
, - Answer:
- Each horizontal drainage pipe must have a cleat at its upper terminal.
- Required for horizontal runs more than 100'.
- For each horizontal change of direction exceeding 135°.
- Front Main Cleanout.
9. Maximum distance a cleanout can be spaced apart:
- Answer: 100'.
10. Minimum clearance in front of a cleanout:
- For 2" or less: 12"
- For 2" or more: 18".
11. Maximum distance underfloor cleanout can be from an access door:
- Answer: 20'.
12. Protection from backflow for fixtures below manhole cover:
- Answer: Back Water Valve.
13. Minimum sewage ejector discharge capacity for water closets:
- Answer: 20 gallons per minute.
14. Minimum size discharge pipe for a single dwelling ejector:
- Answer: 2".
15. Minimum clearance for the lowest inlet connected to the ejector pump:
- Answer: 2" clearance from the high water or starting level of the sump.
16. Can macerating toilet systems replace sewage pump systems?
, - Answer: Yes, with prior approval of the AHJ.
17. Minimum size discharge pipe for a macerating toilet system:
- Answer: 3/4".
18. Minimum pitch required for a 2" horizontal drain:
- Answer: 1/4" per foot.
19. Type of valve required on discharge line from an ejector pump:
- Answer: Swing check valve and gate or ball valve.
20. Location of the gate valve on the discharge line of an ejector pump:
- Answer: Downstream of the backwater valve.
21. Proximity of drainage connections to changes in direction for suds-producing fixtures:
- Answer: Drainage connections shall not be made within 8' of a vertical or horizontal change in
direction.
22. Testing requirements for the DWV system (Water and Air):
- Answer: 10' head of water for 15 minutes and 5 psi for an air test.
23. Public sewer availability criteria:
- Answer: When the dwelling is more than 200' away from the sewer.
24. Building sewer starting point:
- Answer: 2' away from the building.
25. Determination of building sewer size:
- Answer: Based on DFUs (Drainage Fixture Units).
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller bestscores1. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.48. You're not tied to anything after your purchase.
