HEAVY TRUCK STEERING AND SUSPENSION MICHIGAN MECHANIC STUDY GUIDE WITH COMPLETE SOLUTIONS
7 views 0 purchase
Course
Heavy truck
Institution
Heavy Truck
HEAVY TRUCK STEERING AND SUSPENSION
MICHIGAN MECHANIC STUDY GUIDE WITH
COMPLETE SOLUTIONS
YOU HAVE REPLACED A POWER STEERING PUMP WHICH FAILED. WHAT
SHOULD YOU DO BEFORE PUTTING THE TRUCK BACK INTO SERVICE? - Correct
Answer ️️ -A. REPLACE THE HYDRAULIC LINES.
B. REMOVE AIR WITH A PRESSURE...
HEAVY TRUCK STEERING AND SUSPENSION MICHIGAN MECHANIC STUDY GUIDE WITH COMP LETE SOLUTIONS YOU HAVE REPLACED A POWER STEERING PUMP WHICH FAILED. WHAT SHOULD YOU DO BEFORE PUTTING THE TRUCK BACK INTO SERVICE? - Correct Answer ✔️✔️-A. REPLACE THE HYDRAULIC LINES. B. REMOVE AIR WITH A PRESSURE BLEEDER. (NOT CORRECT AWNSER) C. FLUSH THE SYSTEM WITH CLEAN POWER STEERING FLUID. (POSSIBLE CORRECT AWNSER) D. ALL OF THE ABOVE. (NOT CORRECT AWNSER) IN THE TANDEM SETUP SHOWN BELOW, RUBBER BUSHINGS WOULD BE FOUND AT: - Correct Answer ✔️✔️-A. POINT B. B. POINT C. C. POINT A. (CORRECT AWNSER) D. ALL OF THE ABO VE. (NOT CORRECT AWNSER) AFTER YOU HAVE PUT ON A NEW TIE ROD END, WHAT SHOULD YOU CHECK AND CORRECT IF NECCESSARY? - Correct Answer ✔️✔️-A. CAMBER. (NOT CORRECT AWNSER) B. WHEEL TURN ANGLE. C. TOE SETTING. (CORRECT AWNSER) D. CASTER. TO REMOVE KING PIN DRA W KEYS FROM THE AXLE BEAMS, YOU SHOULD: - Correct Answer ✔️✔️-A. DRIVE THEM OUT FROM THE SMALL END WITH A SOFT DRIFT. (POSSIBLE CORRECT AWNSER) B. HEAT THE BEAM AND TAP THEM OUT. (NOT CORRECT AWNSER) C. USE A SHOCK PULLER THREADED INTO THE LARGE END OF THE KEYS. D. FIRST DRILL OUT THE MIDDLE OF THE KEYS TO WEAKEN THEM, THEN DRIFT THEM OUT. (NOT CORRECT AWNSER) WHICH OF THESE WILL CAUSE RAPID OR UNEVEN TIRE WEAR IF SET INCORRECTLY? - Correct Answer ✔️✔️-A. STEARING GEAR PRELOAD. B. CASTER. C. CAMBER. (CORREC T AWNSER) D. ALL OF THE ABOVE. (NOT CORRECT AWNSER) THE POSITION OF THE FRONT TIRES IN THE DRAWING BELOW INDICATES TOO MUCH: - Correct Answer ✔️✔️-A. TOE IN. (NOT CORRECT AWNSER) B. POSITIVE CASTER. (NOT CORRECT AWNSER) C. NEGATIVE CAMBER. D. POSITIVE CAMB ER. (CORRECT AWNSER) IN REFERENCE TO THE BELOW ILLUSTRATION, WHICH STATEMENT IS CORRECT? - Correct Answer ✔️✔️-A. THE STEERING ARM IS LOCATED AT POINT Z. B. THE PITMAN ARM IS LOCATED AT POINT X. (NOT CORRECT AWNSER) C. THE DRAG LINK IS LOCATED AT POINT Y. (CORRECT AWNSER) D. NONE OF THE ABOVE.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller BrittieDonald. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.49. You're not tied to anything after your purchase.
