Woodshop Test |Verified Questions with Correct Answers
3 views 0 purchase
Course
Woodshop
Institution
Woodshop
Woodshop Test |Verified Questions with Correct Answers
of the following steps used to square a board, which step is first?
A. Joint a working edge
B. Rip to width
C. Cut one end square
D. Cut to length
A. Joint a working edge
Which joint is most commonly used on the corners of a picture fram...
Woodshop Test |Verified Questions with Correct Answers
of the following steps used to square a board, which step is first?
A. Joint a working edge
B. Rip to width
C. Cut one end square
D. Cut to length
A. Joint a working edge
Which joint is most commonly used on the corners of a picture frame?
A. Miter
B. Butt
C. Dado
D. Dowel
A. Miter
What is a common method used to check for squareness?
A. Measure the circumference
B. Measure diagonally across the corners
C. Measure side to side
D. Measure from top to bottom
B. Measure diagonally across the corners
What standard size of a sheet of plywood?
A. 48" x 96"
B. 24" x 96"
C. 36" x 96"
D. 60" x 96"
A. 48" x 96"
When must safety glasses must be worn?
A. Up to the students discretion
B. Only required when operating machines
C. Not required when working with hand tools
D. At all times in the shop
D. At all times in the shop
What is a "rip" cut?
A. A cut with the grain
B. A cut which tears the grain
C. A cut across the grain
D. A cut which is at a 45 degree angle to the grain
A. A cut with the grain
, Why is it important to sand with the grain?
A. The sandpaper lasts longer
B. The scratches are less visible
C. Sandpaper is made to sand with the grain
D. It creates less dust
B. The scratches are less visible
What happens if excess glue is left on a project?
A. Glue has already absorbed into the wood
B. Glue will dissolve when the stain touches it
C. Stain will cover glue
D. Glue will leave a yellow/white spot
D. Glue will leave a yellow/white spot
Hardwoods come from what kind of trees?
A. Cone bearing
B. Needle bearing
C. Deciduous
D. Coniferous
C. Deciduous
What is the Z axis on a CNC machine?
A. Front to back
B. Left to right
C. Diagonal
D. Up and down
D. Up and down
What is a plan of procedure?
A. List of materials
B. List of written steps
C. Cost estimate
D. Drawing
B. List of written steps
Where can complete information be found on the proper handling of storage of lacquer and stains
A. Architectural woodworking standards
B. Machine owners manual
C. Safety data sheet
D. Poison control sheet
C. Safety data sheet
What is the minimum clamp time for gluing a panel?
A. 24 hours
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller LectAziim. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.49. You're not tied to anything after your purchase.