Exam (elaborations)
Workbook for Radiographic Image Analysis 4th Edition by Kathy McQuillen Martensen-Test Bank
- Course
- Institution
Complete Test Bank (with Questions Answers)
[Show more]
Seller
Follow
premiumbiz379
Reviews received
Content preview
,Chapter 01: Guidelines for Image AnalysisMULTIPLE CHOICE
1. The patient demographic requirements for radiographic images include all of the following
except
a. patient and facility identification.
b. time and date.
c. birth date.
d. technologist’s identification.
ANS: D REF: P. 8
2. Which of the following is true about image markers?
1. They are radiopaque.
2. They should be reversed before being placed on the IR.
3. They should be positioned as close to the median plane as possible.
4. They will be magnified if positioned on the imaging table or patient.
a. 1 only
b. 1 and 4 only
c. 2 and 3 only
d. 4 only
ANS: B REF: P. 10
3. What is the marker placement for the projection of lateral vertebrae?
a. Laterally on the side being identified
b. Anteriorly, identifying the side positioned closer to the IR
c. Anywhere within exposure field
d. Laterally, identifying the side situated closer to the IR
ANS: B REF: P. 10 | Box 1-3
4. What is the marker placement for the projection of PA cranium?
a. Laterally on the side being identified
b. Anteriorly, identifying the side positioned closer to the IR
c. Anywhere within the exposure field
d. Laterally, identifying the side situated closer to the IR
ANS: A REF: P. 10 | Box 1-3
5. What is the marker placement for the projection of PA oblique vertebrae?
a. Laterally on the side being identified
b. Anteriorly, identifying the side positioned closer to the IR
c. Anywhere within the exposure field
d. Laterally, identifying the side situated closer to the IR
ANS: D REF: P. 10 | Box 1-3
6. What is the marker placement of the projection of lateral hand.
, a. Laterally on the side being identified
b. Anteriorly, identifying the side positioned closer to the IR
c. Anywhere within the exposure field
d. Laterally, identifying the side situated closer to the IR
ANS: C REF: P. 10 | Box 1-3
7. Which guideline should be used to position the identification (ID) plate?
a. Place the ID plate within the collimated field whenever possible.
b. Position the ID plate toward the direction in which the central ray was angled.
c. Position the ID plate next to the narrowest anatomic structure.
ANS: C REF: P. 12
8. Good collimation practices will do all of the following except
a. decrease the radiation dosage.
b. affect the amount of scatter radiation that reaches the IR.
c. reduce the visibility of recorded details.
d. reduce digital radiography histogram analysis errors.
ANS: C REF: P. 14
9. Elongation occurs in all of the following situations except when the
a. part is off center.
b. central ray is angled with the part.
c. central ray and part are perpendicular but the IR is angled.
d. central ray and IR are perpendicular and the part is angled.
ANS: D REF: PP. 22-23
10. For an open joint space to be obtained, the central ray must be aligned _____ to the joint.
a. perpendicular
b. parallel
c. 5 degrees cephalic for each 4 inches of tissue thickness
d. 5 degrees caudal for each 4 inches of tissue thickness
ANS: B REF: P. 25
11. When the central ray is angled, the structure situated _____ is projected the most.
a. farther away from the IR
b. closer to the IR
c. proximal to the tube
d. distal to the tube
ANS: A REF: P. 21
12. Three images were obtained on the same structure with a computed radiography system.
Image 1 was obtained using a 48-inch source–image receptor distance (SID) and a 5-inch
object–image receptor distance (OID); image 2 was obtained using a 48-inch SID and a 3-
inch OID; and image 3 was obtained with a 48-inch SID, a 3-inch OID, and a larger IR.
Which image will demonstrate the sharpest recorded detail?
a. Image 1
, b. Image 2
c. Image 3
d. There will be no difference in recorded detail.
ANS: B REF: P. 28
13. Three images were obtained on the same structure with a computed radiography system.
Image 1 was obtained using a 48-inch source–image receptor distance (SID) and a 5-inch
object–image receptor distance (OID); image 2 was obtained using a 48-inch SID and a 3-
inch OID; and image 3 was obtained with a 48-inch SID, a 3-inch OID, and a larger IR.
Which image will demonstrate the greatest size distortion?
a. Image 1
b. Image 2
c. Image 3
d. There will be no difference in size distortion.
ANS: A REF: PP. 22-23
14. A small focal spot should be used for each of the following situations except when
a. fine detail demonstration is important.
b. extremities are imaged.
c. the milliamperage setting is above 300.
d. the patient can control motion.
ANS: C REF: P. 29
15. An image demonstrating motion and adequate density was obtained using 100 mA at 0.5
seconds. If the time is changed to 0.25 seconds, what mA should be used to maintain
density?
a. 100 mA
b. 200 mA
c. 300 mA
d. 400 mA
ANS: B REF: PP. 30-31
16. Anatomical relationships are affected by
1. varying degrees of patient obliquity and flexion.
2. off centering.
3. geometrical factors of magnification, elongation, and foreshortening.
4. similar structures of shape and size.
a. 1 and 4 only
b. 1, 2, and 4 only
c. 1, 3, and 4 only
d. None of the above
ANS: D REF: PP. 18-19
17. Good collimation practices result in which of the following?
1. Reduces histogram analysis errors
2. Clearly delineates the VOI
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller premiumbiz379. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $26.62. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
79079 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now