100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Fire Inspector 2: Combined $9.89   Add to cart

Exam (elaborations)

Fire Inspector 2: Combined

 1 view  0 purchase
  • Course
  • Institution

Fire Inspector 2: Combined Fire protection engineers have established _____ PSI as a minimum required residual pressure when computing the available water for flow test results. Ans- 20psi The most common gallonage rating for horizontal shaft pumps in use today are _____ - _____ GPM. Ans- 500...

[Show more]

Preview 3 out of 24  pages

  • March 27, 2023
  • 24
  • 2022/2023
  • Exam (elaborations)
  • Questions & answers
avatar-seller
Fire Inspector 2: Combined
Fire protection engineers have established _____ PSI as a minimum required residual pressure when
computing the available water for flow test results. Ans- 20psi



The most common gallonage rating for horizontal shaft pumps in use today are _____ - _____ GPM.
Ans- 500 - 1500 gpm



A fire pump serving a standpipe system should be tested ______ Ans- weekly



A fire department pumper can effectively supply around ______ feet in a high rise building depending
on hydrant pressure and other factors. Ans- 450 feet



Class 2 standpipe is for __________ use Ans- occupational



Standpipe classifications:

1.

2

3. Ans- 1. Fire Dept only

2. Occupant use only

3. Both Fire Dept and Occupant use



NFPA 13D requires _______ for any sprinkler Ans- 18 GPM



Minimum water supply for a class 1 or 3 standpipe system is _____ gpm for at least 30mn with 65psi
residual pressure at the highest outlet. Ans- 500



Stored material should not be stacked closer than ____ inches to a sprinkler head Ans- 18 inches



_______ system is used when it is especially important that water damage be prevented, even if the
sprinkler pipes should break accidentally. Ans- Preaction

,Fire dampers are usually activated by _____ ______ Ans- fusible links



________ detectors are - activated by heat (expansion) and are self-resetting (automatic) Ans- Bimetallic



Class ____ fires: fire of flammable and combustible liquids and gases such as gasoline, kerosene and
propane Ans- B



Pressure tanks should be filled ______ of water with ____ psi Ans- 2/3; 75psi



Fire extinguishers >40lbs should be mounted no higher than ______ feet from the floor Ans- 3 ½



_______ _______ is an aqueous solution of either potassium carbonate and water or potassium acetate
and water Ans- Wet chemical



_______ _______ extinguishers limitations are the clean-up Ans- Dry chemical



_____ ______ agents are difficult to clean up due to water repellant Ans- Dry chemical



When liquid propane gas is stored in the same area as flammable or combustible liquid, the containers
must be at least ______ feet apart Ans- 20 feet



Freeboard should never be more than ___ inches Ans- 6



_________ ________ is wood chips glued together to make flat sheets Ans- Particle board



The maximum size for an approved safety can is ___ gallons Ans- 5



Open burning fire should not be allowed within ______ feet of a structure Ans- 50

, Approved incinerators for burning trash should be at least _____ feet from a structure Ans- 15



Fire in an approved burn container should not be within ____ feet of a structure Ans- 25



Explosives are class ___ hazardous material Ans- 1



TNT/dynamite are considered ______ _________ Ans- high explosives



Explosives must be packed at least ______ feet from the magazine Ans- 50



__________ _________ prevents fire growth Ans- Solid staking (piling)



Rack storage requires sprinklers within all the racks exceeding _____ feet Ans- 25



__________ _________ is the heating of an organic substance without the addition of external heat
Ans- Spontaneous combustion



________ is the transfer of heat energy from one body to another Ans- Conduction



Fire doubles its intensity with each ____ degrees increase Ans- 18



Ordinary combustion produces _____ BTU per 1lb Ans- 8,000 BTU's



______ ________ test flame spread ratings based on: 0-asbestos cement board and 100-red oak wood
Ans- Steiner tunnel



Ohms measures ___________ Ans- resistance



Amps measure ________ _________ Ans- electrical current

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller CertifiedGrades. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $9.89. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

75759 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$9.89
  • (0)
  Add to cart