Powertrains final exam 2023 with complete solution
0 view 0 purchase
Course
Powertrains
Institution
Powertrains
Powertrains final exam 2023 with complete solution
technician b only
Technician A says that when making a 5-6 upshift on a 10-speed transmission, the gearshift lever should be moved into the sixth gear position before flipping the range control button into high range. Technician B says that whe...
powertrains final exam 2023 with complete solution technician b only technician a says that when making a 5 6 upshift on a 10 speed transmission
the gearshift lever should be moved into the sixth ge
Written for
Powertrains
All documents for this subject (15)
Seller
Follow
LECTMAGGY
Reviews received
Content preview
Powertrains final exam 2023 with complete solution
technician b only
Technician A says that when making a 5-6 upshift on a 10-speed transmission, the
gearshift lever should be moved into the sixth gear position before flipping the range
control button into high range. Technician B says that when making a 6-5 downshift on
a 10-speed transmission, the range control button should be flipped into low range
before the gearshift lever is moved into the fifth gear position. Who is correct?
a. Technician A only
b. Technician B only
c. Both A and B
d. Neither A nor B
500,000 miles
What is the recommended transmission oil change interval when Eaton E-500 lubricant
is used in a linehaul truck application?
a. 500,000 miles
b. 5,000,000 miles
c. 500 miles
d. 50,000 miles
both a and b
What is required at PMI to maintain a Solo clutch through its service life?
a. check wear indicator only
b. lube release bearing only
c. both A and B
d. nothing, it is 100% maintenance-free
all of the above
Which of the following is the drive side of a clutch pack assembly?
a. flywheel
b. intermediate plate
c. clutch cover
d. all of the above
smooth shifts into first and reverse
What is the function of the clutch brake?
a. smooth shifts into first and reverse
b. assist the vehicle foundation brakes
c. smooth downshifts from high to low
d. all of the above
fully depressed
Where should the clutch pedal be positioned while the internal adjusting ring of a pull-
type clutch is being turned during a clutch adjustment?
,a. depressed as far as clutch brake engagement
b. fully depressed
c. depressed far enough to remove the free play
d. fully released
low oil level
What is the most likely cause of a failed transmission bearing with noticeable
discoloration?
a. fatigue
b. fretting
c. dirt
d. low oil level
both technicians a and b
When installing a 15 1/2-inch clutch assembly, Technician A uses guide studs installed
in the flywheel to support the weight. Technician B uses a splined pilot shaft when
installing both 14- and 15 1/2-inch clutch assemblies. Who is correct?
a. Technician A
b. Technician B
c. Both Technicians A and B
d. Neither Technician A nor B
70 inches
What is usually considered to be the maximum recommended length for a single-piece
driveshaft operating at speeds of 3,000 rpm?
a. 90 inches
b. 50 inches
c. 95 inches
d. 70 inches
coasting
Which of the following bad driving practices is the most likely cause for clutch facings to
be "thrown off" the clutch discs?
a. coasting
b. skip-shifting
c. riding the clutch pedal
d. starting in an incorrect gear
dampened disc with ceramic facings
Which type of clutch discs would best suit a linehaul truck with a high torque rise
engine?
a. dampened disc with organic facings
b. dampened disc with ceramic facings
c. rigid disc with asbestos facings
d. rigid disc with ceramic facings
1 inch
, Which of the following dimensions is regarded as being correct for clutch brake squeeze
at the clutch pedal?
a. 2 1/2 inches
b. 1 inch
c. 2 inches
d. 1 1/2 inches
all of the above
Which of the following driving practices can cause abnormal wear to clutch
components?
a. standing starts in high gear ratios
b. riding the clutch pedal
c. using the clutch to hold a truck on an incline
d. all of the above
none of the above
On a typical truck twin countershaft transmission, which of the following components
would have to be removed to replace a damaged input shaft?
a. shift bar housing
b. auxiliary section
c. mainshaft
d. none of the above
all of the above
When attempting to identify the source of contaminants in transmission lube, which of
the following are possible?
a. seals
b. breather
c. dirty lubricant storage containers
d. all of the above
all of the above
What is the function of synchronizers in a truck transmission?
a. bring the rotational speed of two rotating components to a single speed
b. locks two rotating components together
c. reduce gear clashing
d. all of the above
50,000-100,000 linehaul miles
When a mineral-based transmission lubricant is used which of the following would be
the usual recommended oil change interval under normal operating conditions?
a. 100,000-150,00 linehaul miles
b. 30,000- 40,000 linehaul miles
c. 50,000-100,000 linehaul miles
d. 250,000 linehaul miles
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller LECTMAGGY. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $11.49. You're not tied to anything after your purchase.
