MILLWRIGHT FASTENERS TEST REVIEW LEVEL 1; EXAM WITH COMPLETE SOLUTIONS 100% VERIFIED 2 Exam (elaborations) Intro to Millwright Exam; Questions and Answers 100% Solved 3 Exam (elaborations) Millwright - Hydraulics Math; Questions and Answers 100% Solved 4 Exam (elaborations) Millwright - Power Tr...
[Show more]
Millwright. Bearings; Questions and Answers 100% Solved Two kinds of flat bearings differ from there housings they are A. Solid end of friction B. Tight and tapered C. Scored and roller D. Solid and split Correct answer D. Solid and split **The choice of bearing tens of the load rotational s...
Preview 4 out of 39 pages
Add to cartMillwright. Bearings; Questions and Answers 100% Solved Two kinds of flat bearings differ from there housings they are A. Solid end of friction B. Tight and tapered C. Scored and roller D. Solid and split Correct answer D. Solid and split **The choice of bearing tens of the load rotational s...
Millwright – Pneumatics; Questions and Answers 100% Solved 1. What is used to control a constant pressure in a pneumatic system? a. A flow control valve b. A regulator c. An MPRV d. Compressor rating Correct answer b. A regulator 2. What type of screw compressor removes some heat during...
Preview 2 out of 6 pages
Add to cartMillwright – Pneumatics; Questions and Answers 100% Solved 1. What is used to control a constant pressure in a pneumatic system? a. A flow control valve b. A regulator c. An MPRV d. Compressor rating Correct answer b. A regulator 2. What type of screw compressor removes some heat during...
Millwright Level 2 - Rigging; Questions and Answers 100% Solved saddle Correct answer the safe working load of a rigging hook is accurate only when the load is suspended from the ______________ of the hook 15 Correct answer OSHA requires that a hook be replaced if the throat has opened _____ ...
Preview 2 out of 6 pages
Add to cartMillwright Level 2 - Rigging; Questions and Answers 100% Solved saddle Correct answer the safe working load of a rigging hook is accurate only when the load is suspended from the ______________ of the hook 15 Correct answer OSHA requires that a hook be replaced if the throat has opened _____ ...
Millwright Exam Prep; Questions and Answers 100% Solved 1. When the downward force at C2 is 100 lb and D2 = 2.5 inches, the upward force at C1 will be ________lb if D1 = 4 inches. A. 160 B. 256 C. 384 D. 240 Correct answer A. 160 x/12.56 sq in = 100 lbs/7.85 sq in x = (100lbs/7.85 sq in)1...
Preview 2 out of 11 pages
Add to cartMillwright Exam Prep; Questions and Answers 100% Solved 1. When the downward force at C2 is 100 lb and D2 = 2.5 inches, the upward force at C1 will be ________lb if D1 = 4 inches. A. 160 B. 256 C. 384 D. 240 Correct answer A. 160 x/12.56 sq in = 100 lbs/7.85 sq in x = (100lbs/7.85 sq in)1...
Millwright Engines; Questions and Answers 100% Solved What is the purpose of a coolant bypass tube when referring to thermostats? Correct answer To reduce warm-up time and prevent cylinder head from over heating What must be done to the air/fuel mixture on a gasoline system before it enters th...
Preview 2 out of 12 pages
Add to cartMillwright Engines; Questions and Answers 100% Solved What is the purpose of a coolant bypass tube when referring to thermostats? Correct answer To reduce warm-up time and prevent cylinder head from over heating What must be done to the air/fuel mixture on a gasoline system before it enters th...
Intro to Millwright Exam; Questions and Answers 100% Solved A millwright is a tradesperson who build, installs, and maintains machinery. Correct answer True ____________________ is the process of reducing and shaping materials using power tools. Correct answer Machining Pharmaceuticals and...
Preview 3 out of 26 pages
Add to cartIntro to Millwright Exam; Questions and Answers 100% Solved A millwright is a tradesperson who build, installs, and maintains machinery. Correct answer True ____________________ is the process of reducing and shaping materials using power tools. Correct answer Machining Pharmaceuticals and...
Millwright Lubrication; Questions and Answers 100% Solved 1. What type of oil or grease would be used in a heavy load situation? a. Synthetic oil b. Extreme pressure lubricant c. Mineral oil d. Any hydraulic fluid Correct answer b. Extreme pressure lubricant 2. The most common measurement...
Preview 2 out of 7 pages
Add to cartMillwright Lubrication; Questions and Answers 100% Solved 1. What type of oil or grease would be used in a heavy load situation? a. Synthetic oil b. Extreme pressure lubricant c. Mineral oil d. Any hydraulic fluid Correct answer b. Extreme pressure lubricant 2. The most common measurement...
Millwright level 2 Setting Baseplates and Soleplates; Questions and Answers 100% Solved first steps in installing baseplates and soleplates Correct answer establish where the plate is to be located another first step in installing baseplates and soleplates Correct answer lay it out to the in...
Preview 2 out of 7 pages
Add to cartMillwright level 2 Setting Baseplates and Soleplates; Questions and Answers 100% Solved first steps in installing baseplates and soleplates Correct answer establish where the plate is to be located another first step in installing baseplates and soleplates Correct answer lay it out to the in...
Millwright Exam; Questions and Answers 100% Solved What are the 2 classes of hydraulics? Correct answer Hydrostatic & Hydrodynamic What causes pressure drop in a hydraulic line? Correct answer Excessive Fluid Velocity What causes aeration in a hydraulic pump? Correct answer Air in the suction l...
Preview 2 out of 9 pages
Add to cartMillwright Exam; Questions and Answers 100% Solved What are the 2 classes of hydraulics? Correct answer Hydrostatic & Hydrodynamic What causes pressure drop in a hydraulic line? Correct answer Excessive Fluid Velocity What causes aeration in a hydraulic pump? Correct answer Air in the suction l...
Millwright Level 2 - Bearings; Questions and Answers 100% Solved What are the principle parts of a friction bearing housing? Correct answer Base, Base bolt slots, cap and cap bolt holes. What are friction bearing housings made from adn what factors influence the choice of housing? Correct an...
Preview 2 out of 10 pages
Add to cartMillwright Level 2 - Bearings; Questions and Answers 100% Solved What are the principle parts of a friction bearing housing? Correct answer Base, Base bolt slots, cap and cap bolt holes. What are friction bearing housings made from adn what factors influence the choice of housing? Correct an...
Millwright Hydraulics; Questions and Answers 100% Solved What is pressure defined as? Correct answer Force per unit area F=(P)(A) This pressure gauge has a calibrated dial face with a pointer attached through linkage to a plunger and a bias spring. This system pressure is connected to the gaug...
Preview 3 out of 18 pages
Add to cartMillwright Hydraulics; Questions and Answers 100% Solved What is pressure defined as? Correct answer Force per unit area F=(P)(A) This pressure gauge has a calibrated dial face with a pointer attached through linkage to a plunger and a bias spring. This system pressure is connected to the gaug...
Millwright Level 1 Final Exam with Complete Solutions On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: Correct answer 1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is: Correct answer aluminum oxide ...
Preview 4 out of 35 pages
Add to cartMillwright Level 1 Final Exam with Complete Solutions On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: Correct answer 1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is: Correct answer aluminum oxide ...
Millwright Level 1 Exam with Complete Solutions What does( 3/4''-10 unc -2a x 1 1/2'' )stand for? Correct answer 3/4''= Nominal diameter 10 = Threads per inch UNC = thread style (Unified national Course) 2= Class of fit A= External thread (b= internal thread) 1 1/2''= length (depth ...
Preview 2 out of 14 pages
Add to cartMillwright Level 1 Exam with Complete Solutions What does( 3/4''-10 unc -2a x 1 1/2'' )stand for? Correct answer 3/4''= Nominal diameter 10 = Threads per inch UNC = thread style (Unified national Course) 2= Class of fit A= External thread (b= internal thread) 1 1/2''= length (depth ...
MILLWRIGHT APPRENTICE LEVEL 1; QUESTIONS AND ANSWERS 100% SOLVED Workshop Practice 1 Review 1. Other than scraping what other used can a three-sided scraper be used for? • Bearing surface and Deburr holes 2. What is a cape nose chisel used for? • Used to cut flat grooves for keyways or ...
Preview 2 out of 7 pages
Add to cartMILLWRIGHT APPRENTICE LEVEL 1; QUESTIONS AND ANSWERS 100% SOLVED Workshop Practice 1 Review 1. Other than scraping what other used can a three-sided scraper be used for? • Bearing surface and Deburr holes 2. What is a cape nose chisel used for? • Used to cut flat grooves for keyways or ...
Millwright - Hydraulics Math; Questions and Answers 100% Solved What is pressure defined as? correct answer Force per unit area F=(P)(A) What is the pressure of the Earth's atmosphere at sea level? correct answer 14.7 psi How is power defined? A. The rate or velocity at which power is don...
Preview 3 out of 18 pages
Add to cartMillwright - Hydraulics Math; Questions and Answers 100% Solved What is pressure defined as? correct answer Force per unit area F=(P)(A) What is the pressure of the Earth's atmosphere at sea level? correct answer 14.7 psi How is power defined? A. The rate or velocity at which power is don...
Millwright Apprentice – intermediate level II; Questions and Answers 100% Solved…Grade A+ Millwright Apprentice – Intermediate level II 1. Compressor 2. What is Pascals law? • Pressure applied to a confined static fluid is transmitted equally and undiminished in all directions, and...
Preview 2 out of 11 pages
Add to cartMillwright Apprentice – intermediate level II; Questions and Answers 100% Solved…Grade A+ Millwright Apprentice – Intermediate level II 1. Compressor 2. What is Pascals law? • Pressure applied to a confined static fluid is transmitted equally and undiminished in all directions, and...
Millwright Hand Tools Level 1 With Complete Solutions 100% 2024 chain wrench used when working on a pipe that is too close to a wall handle pipes up to 18in in diameter strap wrench go up to 12in used on pipe or round material does not mar Brainpower Read More Spanner Wrench made for sp...
Preview 2 out of 9 pages
Add to cartMillwright Hand Tools Level 1 With Complete Solutions 100% 2024 chain wrench used when working on a pipe that is too close to a wall handle pipes up to 18in in diameter strap wrench go up to 12in used on pipe or round material does not mar Brainpower Read More Spanner Wrench made for sp...
Millwright-IP Questions and Answers 100% Solved What controls the servo valve in a hydraulic governor Correct answer Electrical controller What is the purpose of a sleeve Correct answer To reduce shaft wear Why are gate valves used on pump inlet and outlets Correct answer For isolation What do...
Preview 2 out of 6 pages
Add to cartMillwright-IP Questions and Answers 100% Solved What controls the servo valve in a hydraulic governor Correct answer Electrical controller What is the purpose of a sleeve Correct answer To reduce shaft wear Why are gate valves used on pump inlet and outlets Correct answer For isolation What do...
Millwright Test Questions and Answers 100% Solved If the seal was not properly aligned or there is excessive wear in some bearing or shaft______ wear tracks will be the indicator. Correct answer Unusual For removing hard to remove gasket materials found on sealing surfaces ______ is recommen...
Preview 3 out of 22 pages
Add to cartMillwright Test Questions and Answers 100% Solved If the seal was not properly aligned or there is excessive wear in some bearing or shaft______ wear tracks will be the indicator. Correct answer Unusual For removing hard to remove gasket materials found on sealing surfaces ______ is recommen...
EXAM WITH COMPLETE SOLUTIONS 100% VERIFIED MILLWRIGHT FASTENERS TEST REVIEW LEVEL 1; EXAM WITH COMPLETE SOLUTIONS 100% VERIFIED 1) Machine screws are a) Used without nuts b) Used with nuts c) Are not fasteners d) A&B 2) Machine screws are designed by a) Length and head type b) Size and ...
Preview 2 out of 10 pages
Add to cartEXAM WITH COMPLETE SOLUTIONS 100% VERIFIED MILLWRIGHT FASTENERS TEST REVIEW LEVEL 1; EXAM WITH COMPLETE SOLUTIONS 100% VERIFIED 1) Machine screws are a) Used without nuts b) Used with nuts c) Are not fasteners d) A&B 2) Machine screws are designed by a) Length and head type b) Size and ...
Millwright Rigging & Lifting; Questions and Answers 100% Solved The breaking strength of rope is a. force needed to pull rope b. force needed to tear rope c. force needed to break the rope d. force needed to stretch rope Correct answer c. force needed to break the rope What are spreader beam...
Preview 3 out of 21 pages
Add to cartMillwright Rigging & Lifting; Questions and Answers 100% Solved The breaking strength of rope is a. force needed to pull rope b. force needed to tear rope c. force needed to break the rope d. force needed to stretch rope Correct answer c. force needed to break the rope What are spreader beam...
Millwright Couplings and Clutches; Questions and Answers 100% Solved __________ couplings require positive positioning of the shaft A. Universal B. Flexible C. Centrifugal D. Rigid Correct answer D. Rigid Sleeve, flanged clamped __________ Which permit slight misalignment and endplay of...
Preview 3 out of 19 pages
Add to cartMillwright Couplings and Clutches; Questions and Answers 100% Solved __________ couplings require positive positioning of the shaft A. Universal B. Flexible C. Centrifugal D. Rigid Correct answer D. Rigid Sleeve, flanged clamped __________ Which permit slight misalignment and endplay of...
Millwright - Rigging and Hoisting; Questions and Answers 100% Solved 1. Of a block and tackle with five rope falls and minimum friction, how much force is needed to retain 250lbs? a. 50 lbs b. 100 lbs c. 250 lbs d. 75 lbs Correct answer a. 50 lbs 250lbs/5 = 50 lbs 2. What diameter rope i...
Preview 2 out of 15 pages
Add to cartMillwright - Rigging and Hoisting; Questions and Answers 100% Solved 1. Of a block and tackle with five rope falls and minimum friction, how much force is needed to retain 250lbs? a. 50 lbs b. 100 lbs c. 250 lbs d. 75 lbs Correct answer a. 50 lbs 250lbs/5 = 50 lbs 2. What diameter rope i...
Millwright Turbines; Questions and Answers 100% Solved turbine is a machine that converts Correct answer kinetic energy into mechanical energy the blades of each wheel are angled around the rotor so that when the moving fluid or gas Correct answer moves through the blades, the energy of the f...
Preview 1 out of 3 pages
Add to cartMillwright Turbines; Questions and Answers 100% Solved turbine is a machine that converts Correct answer kinetic energy into mechanical energy the blades of each wheel are angled around the rotor so that when the moving fluid or gas Correct answer moves through the blades, the energy of the f...
Millwright – Safety; Questions and Answers 100% Solved What is the fire triangle? a. Wood, coal, combustibles b. Heat, fuel, oxygen c. Class A, B, C d. Green triangle, blue circle, red square Correct answer b. Heat, fuel, oxygen Whose responsibility is it for you to wear Protective equipmen...
Preview 2 out of 6 pages
Add to cartMillwright – Safety; Questions and Answers 100% Solved What is the fire triangle? a. Wood, coal, combustibles b. Heat, fuel, oxygen c. Class A, B, C d. Green triangle, blue circle, red square Correct answer b. Heat, fuel, oxygen Whose responsibility is it for you to wear Protective equipmen...
Millwright - Power Transmission; Questions and Answers 100% Solved 1. Calculate the accurate belt length for the following: Large diameter pulley is 11.25" and the small diameter pulley is 6.125". Shaft centers are 17.5" apart. a. 62.65" b. 62.00" c. 73.98" d. 62.28" Correct answer...
Preview 4 out of 39 pages
Add to cartMillwright - Power Transmission; Questions and Answers 100% Solved 1. Calculate the accurate belt length for the following: Large diameter pulley is 11.25" and the small diameter pulley is 6.125". Shaft centers are 17.5" apart. a. 62.65" b. 62.00" c. 73.98" d. 62.28" Correct answer...
MILLWRIGHT: LESSON 2; MAINTENANCE AND ITS TYPES course Title: MILL WRIGHT (3 Months course) Lesson No: 02 Topic: Maintenance and its Types Date: Planned Maiotcnancc: In planned maintenance the maintenance action is carried cut iuth sone fore thoughts. prior planning, record keeping an...
Preview 4 out of 54 pages
Add to cartMILLWRIGHT: LESSON 2; MAINTENANCE AND ITS TYPES course Title: MILL WRIGHT (3 Months course) Lesson No: 02 Topic: Maintenance and its Types Date: Planned Maiotcnancc: In planned maintenance the maintenance action is carried cut iuth sone fore thoughts. prior planning, record keeping an...
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Stuvia is a marketplace, so you are not buying this document from us, but from seller GOLDTUTORS. Stuvia facilitates payment to the seller.
No, you only buy these notes for $50.99. You're not tied to anything after your purchase.
4.6 stars on Google & Trustpilot (+1000 reviews)
78140 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now
