Bundle For NCCCO Exam Questions with Correct Answers

NCCCO Practice Test Questions with Correct Answers Crane configuration includes: A. reeving, boom length, counterweight, on outriggers, on rubbers, extensions or jibs stowed or mounted, off sets, wire rope type or construction B. hoist drum speeds, line pull, wire rope size and rigging C. lo...

NCCCO Final Test Questions with Correct Answers Which area do truck cranes without a 5th outrigger generally have no lifting capacity unless the manufacturer states otherwise? - Answer-The front What is the definition of "operating radius?" - Answer-The distance from the center of rotation of...

NCCCO Test 3 Questions with Correct Answers The crane is out of level, you release the swing break, the boom swings downhill, your: - Answer-Load radius increases Blocking can be placed under the ends of tracks to: - Answer-Increase the cranes stability when Operating over front or back Wh...

NCCCO Test 1 Questions with Correct Answers Where is the best location for leveling a crane? - Answer-Upperworks When determining the "gross load" the best method is: - Answer-Get an accurate load weight and add the rigging. By order of hitch strength, which is the correct answer? - Answer...

NCCCO TEST 2 Questions with Complete Solutions When making a multiple crane lift, it is important for the operator to understand that: - Answer-The weight may increase if the other crane lands the load If a crane is not set-up level and the operator swings a load from the high side to the low s...

NCCCO Exam Questions with Correct Answers When hoisting personnel, within what percentage of level must a telescopic boom crane be in order for the gross ratings in the load chart to remain valid? - Answer-1% Load line of crane becomes energized by power line. There are no signs of any other d...

NCCCO Test Questions with Correct Answers ancillary attachment - Answer-devices attached to the crane that perform functions other than lifting a load with a hook, such as forks, augers, grapples, or a digging bucket anti-two block device - Answer-a device that prevents two blocking from occurr...

NCCCO Tower Crane Exam Questions with Correct Answers Splices in rall tracks shall have - Answer-Smooth Joints Hydraulic systems should have their proper fluid level checked - Answer-Daily If power fails during operations, the following shouldn't apply - Answer-Do your best to finish movi...

NCCCO RIGGING 1 & 2 Exam Questions with Correct Answers OSHA 1910 - Answer-General Industry Standards OSHA 1926 - Answer-Construction Industry Standards OSHA 1910.180 - Answer-Crawler, Locomotive and Truck Cranes OSHA 1910.184 - Answer-Slings OSHA 1926.251 - Answer-Rigging Equipment us...

NCCCO Rigger 1 Exam Questions with Correct Answers What is the max included angle for a shackle? - Answer-120 Degrees Wire rope clips and wedge sockets shall be designed to have a minimum connection efficiency of? - Answer-80 % The center of gravity location of a load may _________of the loa...