Exam (elaborations)
EWRB Exam: Questions And Proper Solutions
- Course
- Institution
EWRB Exam: Questions And Proper Solutions
[Show more]
Content preview
EWRB Exam: Questions And Proper SolutionsIn New Zealand, the standard distribution system has the neutral conductor
connected to the earth at the main switchboard on all low voltage
installations. What name is given to this type of system? Right Ans -
Multiple Earthed Neutral or MEN system.
State the test voltage used for carrying out an insulation resistance test on
three-phase, 400V, electrical equipment incorporating MIMS elements.
Right Ans - 500v dc
State one reason why the resistance of the protective earthing conductor of a
flexible cord for a Class I electrical appliance is set at a maximum of 1 Ω
Right Ans - Under fault conditions, it prevents the touch voltages rising to
dangerous levels.
To ensure sufficient fault current flows to operate the protective device
State one factor that determines the voltage drop in a 400V, final subcircuit
TPS cable. Right Ans - Type of conductor material
Cross-sectional area
Load
Length of cable
An isolator for 230V electrical equipment has been replaced. During the work
the phase (active) and neutral were accidentally transposed at the supply side
of the isolating switch. What potential danger would this transposition create?
Right Ans - The internal circuitry of the electrical equipment would be live
when the isolating switch is in the OFF position
A voltage test for isolation is being carried out on a three-phase, 400V oven
that may or may not be live. State the main safety issue that would occur if the
only testing done was between each phase. Right Ans - One phase could
still be alive.
List two types of earth electrode that may be used to connect an MEN system
to the mass of earth. Right Ans - Earth rod
Buried electrode
Metallic reinforcing
, Earth mat
State what is meant by the term current rating as it applies to an HRC fuse?
Right Ans - This is the maximum current that the fuse is designed to carry
continuously
State one reason why an RCD tester is used to test a PRCD. Right Ans - To
verify that the PRCD operates within specified residual current limits.
To verify that the PRCD operates within specified time limits
A three-phase induction motor is controlled by a star/delta starter that
incorporates thermal overloads.
State one reason why HRC fuses are installed at the origin of the final
subcircuit supplying the induction motor Right Ans - To provide short-
circuit fault protection to both the final subcircuit and the motor.
Define the term isolation as it relates to three-phase equipment. Right Ans -
Means the equipment has been deliberately disconnected from the electricity
supply
And precautions have been taken to prevent reconnection of the supply to the
equipment
Describe how the prove-test-prove method of testing is carried out. Right
Ans - The test instrument is checked to be operating correctly on a known live
source
The equipment is tested to confirm (or otherwise) that it is isolated
The test instrument is again checked on a known live source to ensure it still
operates correctly
Give a brief description of circumstances when a Danger Tag is used Right
Ans - Where there is a possibility of personal danger through the supply being
restored.
Give a brief description of circumstances when an Out-of-Service Tag is used.
Right Ans - Where equipment is faulty or damaged and using that equipment
would cause damage or injury
State two precautions to be taken when attaching a danger tag to an isolating
switch Right Ans - Make sure the correct isolating switch is tagged.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Zendaya. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
67866 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now