Before leveling a mobile crane on outriggers, an operator should ensure: - ANSWER there is no weight of the crane bearing on any tires
Operating a mobile crane with a long boom, on uneven ground, what support condition should be considered? - ANSWER Keeping 90 degree angle between cylinder rod a...
Before leveling a mobile crane on outriggers, an operator should ensure: - ANSWER there is no weight of the
crane bearing on any tires
Operating a mobile crane with a long boom, on uneven ground, what support condition should be considered? -
ANSWER Keeping 90 degree angle between cylinder rod and pad
What is the primary purpose fir a rooster sheave or auxiliary boom point sheave? - ANSWER Separate the boom
hoist lines
How many randomly broken wires in a lay length must there be on a mobile cranes hoist line, before it should be
removed from service? - ANSWER 6
On a mobile crane, how many broken wires are permitted at the end connection of a pendent before it must be
taken out of service? - ANSWER 1
Type 1 rotation resistant hoist wire rope has a design factor of: - ANSWER 5 to 1
, How many randomly distributed broken wires in rotation- resistant hoist wire rope are considered for
replacement? - ANSWER 2 broken wires in 6 rope diameters
The term net capacity is best defined by which of the terms listed below? - ANSWER Gross capacity minus
capacity deductions
Mobile cranes that are set up on barges, shall have a list chart provided by which of the entities listed below? -
ANSWER Manufacturer
When lifting loads on tires, mobile cranes are rated at what percentage of tipping? - ANSWER 75%
How does the effective weight of a slowed extension relate to the actual weight of the extension? - ANSWER
Higher than the actual weight.
When load radius is between radii values, the operator must use the: - ANSWER longer radius
, If working near overhead power line and using a tag line, which type of rope is least conductive to electricity? -
ANSWER Polypropylene
When working near power lines with the mobile crane, where does OSHA require caution stickers be installed on
all equipment? - ANSWER At operators station and 2 on the outside of the equipment.
According to OSHA table T, what is the minimum clearance for 133kV power lines? - ANSWER 10ft
According to OSHA's table T, what clearance should a mobile crane IN TRANSIT keep while going under 445kV
lines? - ANSWER 16ft
According to OSHA when is it safe to hoist loads with a mobile crane below energized power lines? - ANSWER
When the fully extended boom can't reach the prohibited zone.
According to OSHA 1926. 1411, when you encounter power lines with a voltage of 44kV and the crane is
TRAVELING, according to Table T, what is the minimum required clearance? - ANSWER 6ft
According to OSHA, mobile crane load block hooks must not have a twist in excess of: - ANSWER 0
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller shantelleG. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.99. You're not tied to anything after your purchase.
