100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Previously searched by you
Previously searched by you
logo
Refrigeration Final Exam Questions with Latest Update $16.49   Add to cart
Quickly navigate to
Preview
  2.  
  3. Refrigeration Machine Operator
  4.  
  5. Refrigeration machine operator

Exam (elaborations)

Refrigeration Final Exam Questions with Latest Update
 9 views  0 purchase
  • Course
  • Refrigeration machine operator
  • Institution
  • Refrigeration Machine Operator

A hot pull down occurs when: a) there is excessive ice on the evaporator b) the condenser has been flooded c) the metering device is starving the evaporator d) the temperature of the load is high and the compressor has to run for long periods of time to lower the load d) all of the above - Ans...

[Show more]

Preview 3 out of 20  pages

Document information

  • September 10, 2024
  • 20
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers

Subjects

  • refrigeration final exam questions with latest upd
  • a hot pull down occurs when

Written for

  • Refrigeration machine operator
  • Refrigeration machine operator

Seller

avatar-seller
lectknancy

Reviews received

Content preview

Refrigeration Final Exam Questions with
Latest Update
A hot pull down occurs when:
a) there is excessive ice on the evaporator
b) the condenser has been flooded
c) the metering device is starving the evaporator
d) the temperature of the load is high and the compressor has to run for long periods of
time to lower the load
d) all of the above - Answer-d)

The receiver is located in the: - Answer-Liquid line

The solenoid valve is used to control fluid flow. This valve:
a) has a slow reaction time
b) has a fast or snap action
c) is used to control fan speed
d) is usually normally open in most refrigeration applications - Answer-b)

An EEPR valve uses a sensor in the refrigerated cases's:
a) return air
b) discharge air
c) evaporator outlet
d) evaporator inlet
e) none of the above - Answer-b)

A tech must_________________ the suction service vale before removing the gauge
hose when service is complete
a) Front seat
b) Back seat
c) Mid seat
d) Crack - Answer-b)

What is the purpose of installing a crank case heater? - Answer-To ensure liquid
refrigerant does not migrate during low ambient

What valve is located on the outlet of the receiver? - Answer-king valve

At what location in a regrigeration sytem would a tech install an oil sperator? (in
between what 2 mojor components) - Answer-compressor and condenser

to protect the compressor from damage when refrigerant loss occurs due to a large
leak, a _____________ switch should be installed - Answer-pressure

,a CPR valve________ on rise of_____ presure - Answer-close/ outlet

an EPR valve ____________ on rise of _________ pressure - Answer-opens/ inlet

Why would a tech incorporate EPR valves into a refrigeration system? - Answer-Multiple
temperature and multiple evaporators

The entire refrigerant charge of a system should only fill what percentage of the
receiver?
a) 50%
b) 60%
c) 80%
d) 100%
e) 110% - Answer-c)

What type of valve can be installed between the receiver and the pressure relief
valve(s)?
a) ball valve
b) gate valve
c) three-way valve
d) emergency valve
e) no valve - Answer-c)

2 types of pressure relief valves found on refrigeration systems: - Answer-spring valve
one time

How does a pilot perated liguid line solenoid valve operate? - Answer-Signal sent for
system pressure to start and stop flow

Air conditioning systems:
a) initiate defrost with a defrost clock
b) initiate defrost with a pressure switch
c) defrost during off cycle when the thermostat is satisfied
d) do not require defrost - Answer-d)

A low pressure switch will________ on rise in pressure - Answer-close

A high pressure safety switch will ______ on rise in head pressure - Answer-open

A fan cycling switch will _______ on rise in head pressure - Answer-close

When the box temperature is satisfied, the thermostat contacts on the thermostat
will_______ - Answer-open

Dampers for a condenser will ______ during low ambient conditions - Answer-close

, In an automatic pump-down system, the thermostat controls the ________ operation -
Answer-solenoid valve

In an automatic pump-down system, the pressure controller will control the ______
operation - Answer-compressor

Random defrost is accomplished:
a) with a timer
b) using the high pressure control
c) using the low pressure control
d) during normal off cycle when the box is satisfied - Answer-d)

During electric defrost in a freezer:
a) the compressor and the evaporator fans would be off
b) the electric heaters and the compressor would be on
c) the electric heaters and the compressor would be on
d) all of the above are possible - Answer-a)

Superheat is:
a) the heat of compression at the compressor
b) latent heat given off by the condenser
c) sensible heat absorbed by the refrigerant after it has boiled to vapor
d) heat used to boil the liquid in the evaporator - Answer-c)

A metering device is degined to:
a) lower the boiling point of the refrigerant after it has boiled to vapor
b) regulate the flow of refrigerant into the evaporator
c) produce a reduction in pressure on the liquidrefrigerant
d) all of the above - Answer-d)

A thermostatic expansion valve controls refrigerant flow to the evaporator based on:
a) rate of liquid vaporization
b) external equalizer pressure
c) evaporator suction line super heat
d) all of the above - Answer-c)

A small amount of superheat in the suction line is desirable with a TXV to:
a) keep the proper amount of refrigerant in the receiver
b) ensure that no liquid refrigerant enters the compressor
c) keep from starving the evaporator
d) super heat is not desirable in the suction line - Answer-b)

When the load on the evaporator increases, the TXV will:
a) decrease the pressure drop across the evaporator
b) increase the flow of refrigerant
c) decrease the flow of refrigerant

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller lectknancy. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $16.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

83637 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$16.49
  • (0)
  Add to cart