100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Driver- Operator Pumper Questions with Accurate Answers $11.99   Add to cart

Exam (elaborations)

Driver- Operator Pumper Questions with Accurate Answers

 5 views  0 purchase
  • Course
  • FIRE APPARATUS DRIVER/OPERATOR - PUMPER
  • Institution
  • FIRE APPARATUS DRIVER/OPERATOR - PUMPER

Driver- Operator Pumper

Preview 3 out of 20  pages

  • August 26, 2024
  • 20
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • FIRE APPARATUS DRIVER/OPERATOR - PUMPER
  • FIRE APPARATUS DRIVER/OPERATOR - PUMPER
avatar-seller
julianah420
Driver- Operator Pumper

Water - answer- most commonly used extinguishing agent
- noncombustible
- absorbs large amounts of heat

Waters Boiling Point - answer212° F

Waters freezing point - answer32°F

Waters Expansion Rate - answer1,700 to 1 at 500° F

Law of Specific Heat - answerMeasures the ability of any substance to absorb heat

Measured in BTUs (British Thermal Units)

1 BTU = the amount of heat required to raise 1lb of water 1°F

Law of Latent Heat of Vaporization - answerThe amount of heat needed to turn a liquid
into a vapor

1 BTU to raise 1lb of water 1 degree up to 212° F

Adjustable Fog Nozzle - answerStraight Stream
Narrow Fog
Wide Fog

All 3 discharge at a rate of 100 gpm
The wider the pattern, the shorter the time span to fill a room with steam.

Advantages of Water - answer1. Can absorb large amounts of heat
2. As surface area increases, heat absorption increases
3. Water is plentiful in most areas
4. Steam occupies 1,700 times its original volume as water

Disadvantages of Water - answer1. High surface tension limits its penetration into
dense materials
2. Incompatible with or reactive to certain fuels and combustible materials
3. Ice makes roofs and ladders slippery and can make equipment malfunction
4. Conducts electricity and makes work with energized electrical equipment dangerous

Water Pressure - answerThe force of water per unit area

,PSI - answerpounds per square inch

The elevation of water defines psi

Column of water = 1 in x 1 in x 12 in = 0.434 psi

Height determines psi

6 Characteristics of Water - answerBED PAD

Bottom
Equal
Depth

Perpendicular
All
Density

Bottom - answerThe pressure at the bottom is independent of the shape of the liquid
container above it

Equal - answerThe pressure transmitted to a confirmed amount of water is transmitted
equally in all directions

Depth - answerThe pressure of water in an open container is proportional to its depth

Perpendicular - answerThe pressure on an amount of water is perpendicular to any
surface it acts on

All - answerAt any point in the water in a container, pressure is equal in ALL directions -
including upwards

Density - answerThe pressure of a liquid in an open container is proportional to the
density of the liquid

Density = the materials weight compared to that of an equal quantity of water

6 Types of Pressure - answer1. Atmospheric
2. Head
3. Static
4. Flow
5. Residual
6. Normal operating

Atmospheric Pressure - answerThe pressure the atmosphere experts on earth

, Sea level = 14.7 psi

Pounds Per Square Inch Gauge - answerPSIG

Shows with atmospheric pressure included in the reading

Pounds Per Square Inch Absolute - answerPSIA

The atmospheric pressure is included, so 14.7 should be subtracted from the overall
reading to obtain the true pressure

Head Pressure - answerBased on the force created by the height of a water supply
above the discharge point

To calculate = divide the head height by 2.3

Static Pressure - answeravailable pressure at a discharge point without water flowing

Residual Pressure - answerwater pressure in a distribution system that is still available
when a hydrant is flowing

Flow Pressure - answerthe forward velocity of water at the discharge point

Measured in a pitot tube and gauge

If diameter of the discharge point is known, the gpm can be calculated

Normal Operating Pressure - answerwater pressure in a distribution system during
regular consumption without any hydrants flowing

Friction Loss - answerThe pressure lost that occurs between the pump and the nozzle
due to hose length and diameter

Reasons for Friction Loss - answer1. Control Valves
2. Hose and Coupling
3. Bends
4. Kinks
5. Adapters
6. Nozzle
7. In Line Gauge

Control Valves - answerWater molecules run against the inside surface of the valves

Hose and Coupling - answerThe smoother the hose lining the less the loss

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller julianah420. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $11.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

79223 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$11.99
  • (0)
  Add to cart