4 inches - maintain a _____ margin of safety from the blade, This means that you must
keep your hands _______ away from the saw blade.
safety glasses - wear ______
proper - keep the blade guard in the ______ position at all times
firmly, fence - hold stock ____ on the table and against the ____ so it does not shift or
kick out when using the miter saw
complete stop - after making a cut, but before raising the saw blade on the miter saw
make sure that the blade has come to a ____
under - never move your hands _____ the blade, whether it is moving or not on the
miter saw
7 inches - all wood scrap goes in the fire pit bin, not the scrap bin unless it's over _____
long
cross - the miter saw will only be used for a type of cut called ______
cutting to fast, board is moving, board not completely pushed back on fence, board is
warped - 4 main safety concerns for kickback or binding on the miter saw
miter saw - step one in squaring a board
miter saw - used for crosscutting wood to rough or exact length (1/8th inches long)
jointer - second step in squaring a board
Jointer - used for jointing and edging wood
best - joint the _____ edge on your board
adjust - do not remove the quard. do not _____ the jointer without shop teachers
permission
1/16th inch - maximum cut depth for jointing an edge is _____
7 inches, 3/8th inch - stock must be at least _____ long to pass through and at least
_____ inches thick on the jointer
, with - feed the work so that the knives will cut "_____ the grain" on the jointer (only use
new stock that is free of knots , splits and checks)
guard - keep your hands away from the cutter head, even though the ______ is in
position on the jointer
4 inches - maintain at least a ____ margin of safety. this means that your hands should
always be at least _____ from the cutter head at all times
knives - use a push stick when jointing a flat surface or a board that is less than 4
inches high. never apply pressure direction over the _____ with your hand
end - do not joint _____ grains on the jointer
sharp - jointer knives must be _____. dull knives will vibrate the stock and may cause a
kickback
3/8 - material cannot be less than ______ thick on the jointer
machine, work area - you must clean the ______ and ______ when done with jointer
table saw - third step in squaring a board
ripping wood to exact width - table saw is used for _________
2nd, parallel - rip ______ side on your board ______ to the jointed edge
towards - the table saw blade spins _____ you; this allows you to control the cut
pushstick - use a ______ with smaller stock to protect your fingers on the table saw
blade guard, important - the table saw is equipped with a _______. this device is the
most ____ safety feature for this machine and may not be removed
teacher, back - if you ever need to remove the splitter or the guard on the table saw to
make a cut, you must get the _____ to help, when you complete the cut put the splitter
___ in place
1/2 inch - when using the table saw set the blade so that it extends no more than ____
above the stock to be cute
reach, behind - stand to the left side of the blade on the table saw. do not ____ across it
or stand _____ the blade due to kickback
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller VasilyKichigin. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.48. You're not tied to anything after your purchase.
