ECE6610: Wireless Networks Fall 2016
Homework 1
Given: August 30, 2016
Due: September 23, 2016 (Midnight) + 1 week for “off Campus” students
Submission Instructions:
Submit your homework as a DOC or PDF file to No hardcopies will be accepted. Scanned pages are fine.
Dr. Ian F. Akyi...
a telephone line is known to have a loss of 20 db the input signal power is measured at 1 watt
and the output signal noise level is measured at 1 mw
Written for
Georgia Institute Of Technology
ECE 6610 (ECE6610)
All documents for this subject (2)
Seller
Follow
solutiontestbank011
Reviews received
Content preview
ECE6610: Wireless Networks
Fall 2016
Homework 1
Given: August 30, 2016
Due: September 23, 2016 (Midnight) + 1 week for “off Campus” students
Submission Instructions:
Submit your homework as a DOC or PDF file to infocom@ece.gatech.edu
No hardcopies will be accepted. Scanned pages are fine.
Dr. Ian F. Akyildiz
Ken Byers Chair Professor in Telecommunications
Broadband Wireless Networking Laboratory
School of Electrical and Computer Engineering
Georgia Institute of Technology, Atlanta, GA 30332
Tel.: 404-894-5141; Fax: 404-894-7883; E-Mail: infocom@ece.gatech.edu
Question 1 (Basics of Wireless Communications):
a) A telephone line is known to have a loss of 20 dB. The input signal power is measured at 1
Watt, and the output signal noise level is measured at 1 mW. Using this information, calculate
the output signal to noise ratio in dB.
Input signal power = 1 W = 0 dB
Output signal power = Input signal power - Path loss = 0-20 = -20 dB
Output noise level = 1 mW = -30 dB
Output SNR = Output signal power – Output noise level = -20-(-30)= 10 dB
b) What is the maximum data rate that can be supported on a 10 MHz noise-less channel if
the channel uses eight-level digital signals?
, c) A sine wave is used for two different signaling schemes (i) BPSK and (ii) QPSK. The duration
of a signal element is 10-5 s. If the received signal is of the form s(t)=0.005 sin(2π106t+) volts
and if the measured noise power at the receiver is 2.510-8 watts, determine the Eb/N0 in dB for
each modulation.
Duration of signal element T=10-5 s
1 (.((*+
Signal power 𝑃 = 𝑇 = = 0.0000125 = 12.5 µ𝑊
𝑇 ( 𝑠&
&
𝑡
i) BPSK:
Energy per bit Eb=PT=
𝐸𝐵 𝑃 12.510–:
T
= = 500 = 𝟐𝟕 𝒅𝑩
𝑁( 2.410–9T 2.510–9
=
d) Determine the mean received power at the receiver node. The distance between the transmitting
station and the receving nodes is 500m. The transmitter and receiver antenna gains are 10dB
and 5 dB respectively. Use pass loss exponent of 4. The transmitted power is 30 dBm. Do all
calculations using dB.
𝜆 = 𝑣/𝑓
3×109
𝜆= = 𝟎. 𝟏𝟐𝟓 𝐦
2.4×10G
𝑃𝑟𝑥 𝜆
= 𝑃𝑡𝑥 + 𝐺𝑡𝑥 + 𝐺𝑟𝑥 + 10𝛾 log
4𝜋𝑑
𝑃𝑟𝑥
0.125
= 30 + 10 + 5 + 10×4× log
4𝜋×500
𝑃𝑟𝑥 = 45 + 40×−4.70127
2
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller solutiontestbank011. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $15.49. You're not tied to anything after your purchase.
