JOURNEYMAN ELECTRICIAN BUNDLED EXAMS WITH COMPLETE SOLUTIONS

Journeyman Electrician Practice Test With Solutions 100% Solved To find the full-load current rating of the single-phase transformer apply the single-phase current formula as shown:I = (150 kVA x 1000) / 240 volts = 15,000/240 = 625 amperes Which one of the following listed circuit breakers is...

Journeyman Electrician #5 Questions With Solutions 100% Solved Which of the following grounding electrodes is NOT permitted to be used as an effective ground-fault current path? a) the metal frame of a building or structure b) a metal underground water pipe in direct contact with the earth fo...

Journeyman Electrical Closed Book Exam #2 Missed Questions With Solutions 100% Solved What is the function of a neon glow tester? Determines if circuit is alive, determines polarity, and determines if circuit is AC or DC. The connection of a ground clamp to a grounding electrode shall be ___...

Journeyman Electrician practice test 1 With Solutions 100% Solved What is the K-factor for copper and aluminum? Copper: 12.9 Aluminum : 21.2 How to find the K-factor Chapter 9,table 8 Multiply resistance of conductor per foot by the Circular mils size of the conductor Where do I find conducto...

Journeyman Electrician Questions With Solutions 100% Solved The NEC defines a continuous load to be a load where the maximum current on the circuit is expected to continue for at LEAST____ hours or more? three The service disconnecting means for each electrical service shall consist of NOT mor...

Journeyman Electrician Exam 3 Questions With Solutions 100% Solved The MAXIMUM standard rating of the initial non-time-delay fuse for the branch-circuit, shortcircuit, and ground-fault protection of a 1 HP, three-phase, 208-volt, squirrel-cage AC motor shall be _____. a) 6 amperes b) 10 amper...

Florida Journeyman Electrician CB Exam 1 Questions With Solutions 100% Solved Fixtures supported by the framing members of suspended ceiling systems shall be securely fastened to the ceiling framing member by mechanical means such as __________. I. Bolts or screws II. Rivets III. Clips identi...

Journeyman Electrical Closed Book Exam #1 Questions With Solutions 100% Solved The hot resistance of an incandescent lamp is approximately ____ times it's cold resistance. Ten. The proper way of measuring an unknown voltage with a multi-tester is to ____. Start measuring at the highest ra...